D820 is a transparent, extruded film produced from a modified nylon 6 resin which can be used for cures up to 260°F/127°C.
D820 has all the same properties as other nylon film except for its lower melt point. This film is recommended as a bagging film for advanced composite fabrication and other low temperature applications where softness and workability in leak-free films are essential.
If you are looking for a low cost nylon film, D820 is the one.
TYPICAL PROPERTIES |
|
| Tensile Strength (psi) | 17,200 - 20,640 |
| Elongation (%) | 300 |
| Tear Strength (gm/mil) | 500-600 |
Melt Point: Fisher Johns |
423°F/217°C |
| Maximum Use Temperature | 260°F/127°C |
| Minimum Use Temperature | -100°F/73°C |
| Thickness (inches) | .002, .003 |
Widths (inches) |
36, 48, 60, V-Fold |
| Yield (ft2/lb) | 170 |
| Color | Transparent |
| Note: * 4" to 54" lay-flat tubing is available upon request. | |
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA,THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
| Home Page | Product List | Top of Page | E-mail De-Comp |
Page Last Modified: 01/15/2008
