DE-COMP COMPOSITES, INC.
D316
BAGGING FILM
D316 is a green-tinted,
transparent, heat-stabilized, co-extruded film produced from a modified nylon
6 resin which can be used for cures up to 400°F.
D316 is recommended as bagging
film for advanced composite fabrication and other high temperature pressure
applications where softness, workability and defect-free films are essential.
|
PROPERTIES
|
|
Tensile Strength
(psi)
|
12,000
|
|
Elongation (%)
|
Over 300%
|
|
Tearing Strength
(gm/mil)
|
90
|
|
Maximum Use
Temperature
|
400°F/205°C
|
|
Minimum Use
Temperature
|
-80°F-61°C
|
|
Heat Deflection
( 66 psi):
|
365°F/185°C
|
|
Melting
Point
Fisher
Johns:
Crystalline:
|
428°F/220°C
442°F/228°C
|
|
Shrinkage Less
Than 1% at:
|
350°F/177°C
|
|
Flammability
|
Self Extinguishing
|
|
Thickness
(inches)
|
0.002
|
|
Widths (inches)
|
36, 50, 72 V-Fold
18, 24, 36 Tube
60, 72 Sheet
|
SUGGESTED STORAGE METHOD:
All nylon films are
known to be hydrophilic. They absorb up to 2.5% of surrounding
humidity, therefore, it is recommended that this film be kept in a sealed plastic
bag.
 PRINT VERSION
NOTE: THE
INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE
ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING
THIS DATA , THIS MATERIAL, OR RESULTS THERE
FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER
SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR
HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE
LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
Page Last Modified: 03/27/2007
|