Product - D800

D800 is a gold-tinted, transparent, heat-stabilized, co-extruded film produced from a modified nylon 6 resin which can be used for cures up to 350°F/177°C.

D800 is recommended as bagging film for advanced composite fabrication and other high temperature pressure applications where softness, workability and leak-free films are essential.

TYPICAL PROPERTIES
Tensile Strength (psi)	12,000
Elongation (%)	> 300
Tearing StrengthH (gm/mil)	90
Melt Point Fisher John Crystalline	428°F / 220°C 442°F / 228°C
Maximum Use Temperature	350°F / 177°C
Minimum Use Temperature	-80°F / -62°C
Shrinkage -- less than 1% at :	350°F / 177°C
Flammability	Self-Extinguishing
Thickness (inches)	0.002
Widths (inches)	54, 60, 72 Sheet 36, 62 V-Fold
Note: 2" to 54" lay-flat tubing is available upon request.

SUGGESTED STORAGE METHOD:
All nylon films are known to be hydrophilic. They absorb up to 2.5% of surrounding humidity, therefore, it is recommended that this film be kept in a sealed plastic bag.

NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.