D3000-10 is a high denier fiber; non-woven polyester felt which can be used even during volatile evacuation from vacuum bags. This breather can be used at pressures up to 200 psi and temperatures up to 400°F/ 204°C. The material's multidirectional stretch, combined with a low density, light weight construction, enables D3000-10 to conform closely to the contours of the part.
D3000-10 contains no binders that will cause restricted air flow or that will cause adhesion to the part or other component.
|Maximum Use Temperature||400°F/204°C|
|Standard Roll Size||60" x 50 Yd
72" x 50 Yd
NOTE: Slitting is available upon request.
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
|Home Page||Product List||Top of Page||E-mail De-Comp|