D241 is a revolutionary new cutter for cloth, film, bleeder and peel ply. This cutter cuts cleanly into graphite and fiberglass without first having to place masking tape on the material.
D241 comes with a razor sharp, replaceable, tungsten steel cutting wheel, which is available in a 1-1/16"or 1-3/4" diameter. The cutter has a blade guard that remains in place until pressure is applied. The cutting wheel tension is adjustable for cutting thin or thick material.
Part Number: D241l 1-3/4" diameter
Part Number: D241s 1-1/16" diameter
PRINT VERSIONNOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
| Home Page | Product List | Top of Page | E-mail De-Comp |
Page Last Modified: 01/15/2008