DE-COMP COMPOSITES, INC.

PERMA-TOOLS

Hand Tools Needle Files Sanding Tools Rotary Bits& Discs Saw Blades
WHY USE THESE TOOLS?
•
 Tungsten Carbide Tools that last years.
•
 One of the hardest known materials next to diamond.
•
 Used by the worlds top builders.
•
 Will not lose their cutting edge like conventional files.
•
 Cut, Sand & Shape quicker for faster building.
•
 Tools can be cleaned with any solvent.
•
 Ideal for use on woods, plastics, all composites, fiberglass, brick, stone, foam, ceramics, and glass.

 

HAND TOOLS

Available in a variety of sections and sizes with 2 different grit grades, coarse for rapid material removal, and fine for finishing work.  The range covers most tasks that involve sanding or shaping.  They are ideal for wing building and fuselage shaping.  Door and window openings and all arches and curves.

 
PART NUMBER
DESCRIPTION
SIZE
F101
Flat, Fine
9" x 1.5"
F102
Flat, Course
9" x 1.5"
R101
Round Over, Fine
9" x 1.5 dia.
R102
Round Over, Course
9" x 1.5 dia.
R200
Coving, c or f
9" x 1" w/ 1.42" dia.
R201
90° Angle, c or f
9" x 1.5"
R202
Tube, c or f
.710 dia.
R203
Tube, c or f
.470 dia.
R204
Round, c or f
.240 dia.
S204
Square, c or f
.240" x .240"
SET8c
 F101, F102, R200, R201, R202, R203, R204, S204, & Tool Bag - Course
SET8f
 F101, F102, R200, R201, R202, R203, R204, S204, & Tool Bag - Fine
TR1
 Tool Roll

                                

                                                         

R200 Coving Tools
R201 Angle Tools
R203 Full Round Files
R102 Round Overs
R202 Full Round Files
R102
R200
R201
R202
R203

NEEDLE FILES

Needle Files  

     NF1H     

The range of 5 files together with a comfortable Swiss handle, form an extremely versatile set of shaping and finishing tools.   Available flat, knife, round, square, and triangle they are very popular for detail work and with miniaturist builders.  Furniture makers, turners, and sculptors as well with the model builder.  They are offered individually and in a set of 5.

 

SANDING BLOCKS, SHEETS & FLATS

                            

Sanding Blocks Flexible Strips Flat Files
SB140,
SB280,
SB560
FXT103 (f), FXT104(c)
F101 (f), F102 (c) 
5.5" x 2" 
11" x 2" 
22" x 2" 
  2" x 11"
9" x 1.5"
Course on one side, fine on the other
FXT106 (f), FXT107 (c)
2' x 5.5"

Sanding Blocks are one of the most popular and versatile tools.  Being light and easy to handle makes them ideal for schools.  Their simplicity belies their precision. They are perfect for sanding large areas, making accurate right angles, profiling leading and trailing edges, and setting dihedral angles.   The block range is supplemented by thin rigid flats and flexible sheets.  The flexible sheets can be cut and shaped to any form, internal and external.

 

ROTARIES AND CUTTING DISCS

Rotary Bits

Rotary Bit - RC/F 1
Rotary Bits - RC/F 2
Rotary Bits - RC/F 3
Rotary Bits - RC/F 4
Rotary Bits - RC/F 5
Rotary Bits - RC/F 6
RF1 (c or f ) 
RF2  (c or f) 
RF3  (c or f)
RF4  (c or f) 
RF5  (c or f) 
RF6 (c)

Perma-Grit rotaries come with a standard .118" integral arbor, so they can be used with reversible drive tools.  They work well with Minicraft, Dremel, and Flexi-drives.  Offered in a variety of shapes and sizes at 2 different grit grades, they allow the user to cut, rout, and shape a wide range of materials quickly and cleanly, often without the need for secondary finishing.  The range is complemented by cutting discs, available in 2 sizes for cutting the toughest materials from piano wire, fiberglass, ceramics, to high speed steel.

Rotary Cutting Disks

Rotary Cutting Disk - RD 1/2
Rotary Cutting Disk - RD 3
RD1  (.750")  
RD3
RD2  (1.25")
Set of RD1 & RD3

SAW BLADES

Hacksaw and Rodsaw Blades
RS6,
RS12,
HS12
6"  
12" 
12"

Gritted saw blades for standard hacksaws and 12" and 6" rod saws are virtually unbreakable and will cut anything really tough.   Materials easily cut for the first time include ceramics, bricks, stone, and metals.  Jaggy materials like fiberglass pose no problems.  The hacksaws are ideal for straight cutting, and  the rod saw for awkward shapes and cable runs.

PRINT VERSION

NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.

Home Page Product List Top of Page E-mail De-Comp
Page Last Modified:  01/15/2008