DE-COMP COMPOSITES, INC.

  D906

PORCUPINE ROLLER 

D906 is a steel roller with a wood handle designed to perforate films in order to allow air, volatiles, and resin to flow through the film. The amount of resin flow can be controlled by the depth of the pin penetration. D906 may also be used on foam details to give the bonding adhesive a better grip on the foam surface.

TYPICAL PROPERTIES
Small Large
Roller Width (inches) 2 5-1/2
Roller Diameter (inches) 2 1
Length of Pins (inches) 0.25 0.23
Pin Diameter (inches) - maximum 0.068 0.10
Rows of Pins 7 12
Pins per Row 24 7 
Handle Wood Wood
NOTE: Other sizes are available upon request

PRINTVERSION


NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.

Home Page Product List Top of Page E-mail De-Comp
Page Last Modified: 01/15/2008