DE-COMP COMPOSITES, INC.

  D200 TFNP

RELEASE FABRIC

D200 TFNP is a non-porous PTFE coated, plain weave, fiberglass cloth which will contain and release from commercial resin systems and is resistant to all solvents, adhesives, and resins normally encountered in composite and metal bond fabrication.

D200 TFNP is designed as a release fabric that will prevent resins from bleeding through the release fabric and into the breather material. It can be used on metal bond assemblies to promote proper filleting of the adhesive flash.

D200 TFNP is recommended for flat an simple contoured assemblies.
TYPICAL PROPERTIES
Tensile Strength (psi) 70
Maximum Use Temperature 550°F/288°C
Weight (oz/yd2) 3.3
Standard Roll Size 38" x 100 yd
Color Beige

PRINT VERSION

NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.

Home Page Product List Top of Page E-mail De-Comp
Page Last Modified: 01/15/2008