D200 TFP release fabric is a porous PTFE coated plain weave fiberglass cloth and is resistant to all solvents, adhesives, and resin systems normally encountered in composite and metal bond fabrication.
D200 TFP is designed as a release fabric that will allow excess resin, volatile and trapped air to bleed through the release fabric and be absorbed into the bleeder or vented away from the assembly.
D200 TFP is recommended for flat and simple contoured assemblies.
TYPICAL PROPERTIES |
|
| Maximum Use Temperature | 550°F/288°C |
| Weight (oz/yd2) | 1.9 |
| Standard Roll Size | 38" x 100 yd 60" x 100 yd |
| Thickness (inches) | 0.003 |
| Color | Light Beige |
| Note: 80" x 100 yd. rolls are available, subject to a minimum quantity order | |
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
| Home Page | Product List | Top of Page | E-mail De-Comp |
