DE-COMP COMPOSITES, INC.
D7300
SKIVED PTFE FILM
Features |
|||
● |
Outstanding heat and chemical resistance |
● |
Anti-stick properties |
● |
High dielectric strength |
● |
Can be chemically etched for bondability |
Applications |
|||
| |
Laminate release film |
● |
Recommended for fabricating flat or slightly contoured structures only |
Benefits |
|
● |
Low cost |
D7300 PTFE films are manufactured from virgin PTFE resins which are molded, sintered, and skived to the appropriate thickness. This film are widely used in a number of industries due to the material’s outstanding characteristics, including heat and chemical resistance, dielectric strength, and anti-stick properties. It may also be chemically etched on one or both sides for bondability.
D7300 film is supplied in continuous roll form. Slit widths are available in thicknesses ranging from 0.001" to 0.062".
Custom colors are also available.
TYPICAL PROPERTIES |
|||
Thickness |
inches |
.001 |
.002 |
Tolerance |
+/- inches |
.0001 |
.0003 |
Tensile Strength |
Minimum psi |
3000 |
3000 |
Elongation |
% Minimum |
200 |
200 |
Dielectric Strength |
VPM |
3000 |
3000 |
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
| Home Page | Product List | Top of Page | E-mail De-Comp |