PRINTABLE VERSIONDESCRIPTION
WATERCLEAN has been developed to provide an environmentally safe and effective water-based alternative to solvent washing for the removal of surface contaminants. WATERCLEAN is non-hazardous, non-flammable and won’t harm the surface. WATERCLEAN eliminates sanding and/or solvent washing when preparing parts for painting, bonding or other processes that require a completely clean surface. For a totally solvent-free mold release system, use WATERCLEAN, SEALBRITE and WATERSHIELD.
WATERCLEAN benefits are:
| * ENVIRONMENTALLY SAFE | * No build-up on mold |
| * No solvents or alcohol | * Non-flammable carrier |
| * No CFC’s, VOC’s, or ODC’s |
TYPICAL PROPERTIES
| Appearance & Odor | : | White fluid with bland odor |
| Carrier | : | Water |
| Flash Point [C.C] | : | None |
| Coverage | : | Approximately 600 Sq. Ft./Gallon |
| Wt/Gallon | : | 8.0 lbs/Gallon |
| Cure Requirement | : | N/A |
1. WATERCLEAN should appear uniform in container. If not, then shake or stir.
2. Apply a SMALL amount directly on to the mold surface.
3. Using a damp paper towel scrub the surface. Work with small sections until the entire surface is scrubbed. For very large parts, an electric or air buffer can be used.
4. DO NOT allow WATERCLEAN to dry on the mold surface
5. Remove using only WATER. This can be done by rinsing with a wet paper towel or a water sprayer.
6. Rinse until no residue remains-the surface should “feel” clean.
7. Allow surface to dry either by wiping dry with a clean paper towel or by forced air or heat.
8. You are now ready to apply a sealer or release agent.
WATERCLEAN USES
HANDLING
WATERCLEAN needs to be carefully sealed when not in use in order to avoid water evaporation. If this happens either during use or storage, a light misting with water can return WATERCLEAN to usable consistency. NOTE: the addition of too much water will dilute efficiency.
STORAGE AND SHELF LIFE
Store in a dry area in the original closed container. DO NOT store at elevated or freezing temperatures. Shelf life – 12 months.
SAFETY DATA
Material safety data sheets are available for all ZYVAX products and should be consulted prior to use of product.
SHIPPING DATA
| DOT SHIPPING NAME : | None |
| DOT HAZARD CLASSIFICATION : | None |
| DOT I.D. NUMBER : | None |
PACKAGING
WATERCLEAN is available in the following sizes:
1-U.S. gallon can
5-U.S. gallon pail
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
| Home Page | Product List | Top of Page | E-mail De-Comp |