PRINT VERSIOND413Y is designed for use in vacuum bagging. It will maintain an air tight seal during the cure cycle, and then strip clean from the mold during de-bagging. It is formulated without asbestos or solvents.
TYPICAL PROPERTIES |
|
Maximum Use Temperature |
400°F/204°C |
Standard Roll Size (t x w x l) |
1/8"x1/2"x25' |
Rolls per Case |
40 |
Feet per Case |
1,000 |
Color |
Yellow |
Storage |
Keep in cool place at or below 80°F/27°C |
Shelf Life |
4 months from date of manufacture when stored as specified. |
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA, THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.