D350 Toolcoater pressure sensitive tape is a TFE impregnated fiberglass, with a fully cured silicone adhesive, giving optimum release, low friction electrical insulation, dimensional stability and temperature resistance, and has no stretch. It is commonly used to offer permanent release and cushioning on tooling surfaces. Use of D350 will reduce fill and sanding operations and eliminate contamination associated with release agents.
|Maximum Use Temperature||550°F/288°C|
|Minimum Use Temperature||-100°F/-73°C|
|Thickness (inches)||0.003, 0.005, 0.006, 0.010|
|1 to 39|
|Length (yards)||18 & 36|
|Note: Available in 50" width upon special order.|
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA, THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
|Home Page||Product List||Top of Page||E-mail De-Comp|