D404P is a three-piece plastic infusion port assembly. The top screws onto the base eliminating the threaded locking pin that normally wears out the cam.
D404P is ideal for any bagging application up to 215°F, and with all bagging materials and resin systems.
The D404P top has a glued rubber gasket for better vacuum integrity also a compression fitting that will accept a ½” diameter tubing.
The base under the bag has multiple large grooves for better resin flow, you need 1 port for small parts or testing, for larger parts you may need 2 or more ports.
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE; HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA. THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
Page Last Modified: 12/22/2009 Section: Vacuum Bagging Components
RR 4 Box 4460 ● Cleveland, Oklahoma 74020 ● Phone: 918.358.5881 ● Fax: 918.358.3750 E-Mail: email@example.com ● Web Site: www.decomp.com Toll Free: 877.609.5088
|Home Page||Product List||Top of Page||E-mail De-Comp|