D450-G is a 3/8" ID, green kevlar-reinforced silicone rubber hose which incorporates a crush-resistant stainless steel liner to prevent vacuum collapse. The soft silicone exterior is designed to be extremely flexible and to prevent vacuum bag punctures, tool damage, and injury to personnel . Maximum tested continuous use temperature is 450°F/232°C, and maximum autoclave pressure is 250 psi. The D450-G comes standard with a brass, straight, 1/4" npt male fitting on each end and in any length that is required. Straight and 90 degree,1/4, 3/8, 1/2 inch npt male fittings are available upon request.
D1000-SS is a 3/8" ID, all stainless steel hose. There is no need for a steel liner with this hose, because the hose itself can take full vacuum. Maximum continuous use temperature is 1000°F/538°C, and maximum autoclave pressure is 1000 psi. The D1000-SS comes standard with a straight, 1/4" npt male fitting on each end and in any length that is required. Available alternate end fittings are 1/4, 3/8, 1/2 inch female JIC.
NOTE: THE INFORMATION CONTAINED HEREIN IS BELIEVED BY DE-COMP COMPOSITES, INC. TO BE ACCURATE. HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS MADE REGARDING THIS DATA , THIS MATERIAL, OR RESULTS THERE FROM WHETHER USED IN ACCORDANCE WITH OUR INSTRUCTIONS OR NOT. THE USER SHALL MAKE HIS/HER OWN TESTS TO DETERMINE SUITABILITY OF THIS MATERIAL FOR HIS/HER PARTICULAR PURPOSES, IN ANY EVENT, DE-COMP’S LIABILITY SHALL BE LIMITED TO THE PURCHASE PRICE OF THE MATERIAL.
| Home Page | Product List | Top of Page | E-mail De-Comp |
